Market Leader
Your current location：Home > Products > Market Leader
Dioctyl sodium sulfosuccinate solution
Synonyms: AEROSOL(R) OT;
AEROSOL OT-75
Dioctyl sulfosuccinate sodium salt;
Dioctyl sodium sulfosuccinate;
Dioctyl ester of sodium sulphosuccinic acid;
CAS NO: 577-11-7
EINECS: 209-406-4
AEROSOL OT-75
Dioctyl sulfosuccinate sodium salt;
Dioctyl sodium sulfosuccinate;
Dioctyl ester of sodium sulphosuccinic acid;
CAS NO: 577-11-7
EINECS: 209-406-4
CHARACTERISTIC AND APPLICATION
1. Readily soluble in water, with white solution. Insoluble in acid, alkali, heavy metal salts and reducing agents. Penetrate quickly and evenly, with good wetting, penetration, emulsification, foaming properties.
Below 40℃ will be the best penetration effect. In the case of high temperature will be easily alkali hydrolysis.
Penetration T insoluble in alkali, and cannot be directly added to concentrated lye. It should be adding after the lye diluted.
2. Used for processing cotton, linen, viscose and blended products. The treated fabric directly bleached or dyed without scouring, the dyeing defect caused by bad cotton could be improved. Fabric feel softer and plump after printing and dyeing. When scouring and bleaching the green, it would be better drain the dye firstly to ensure the penetration effect.
3. If found too much foam during using, it could be add a small amount defoamer, GP or octanol, tributyl phosphate, etc.
4. For cotton dyeing; for pesticide wettable powder.
APPLICATION
1. Readily soluble in water, with white solution. Insoluble in acid, alkali, heavy metal salts and reducing agents. Penetrate quickly and evenly, with good wetting, penetration, emulsification, foaming properties.
Below 40℃ will be the best penetration effect. In the case of high temperature will be easily alkali hydrolysis.
Penetration T insoluble in alkali, and cannot be directly added to concentrated lye. It should be adding after the lye diluted.
2. Used for processing cotton, linen, viscose and blended products. The treated fabric directly bleached or dyed without scouring, the dyeing defect caused by bad cotton could be improved. Fabric feel softer and plump after printing and dyeing. When scouring and bleaching the green, it would be better drain the dye firstly to ensure the penetration effect.
3. If found too much foam during using, it could be add a small amount defoamer, GP or octanol, tributyl phosphate, etc.
4. For cotton dyeing; for pesticide wettable powder.
APPLICATION